1301 Series High-Pressure Regulators
Extra valve disk through a
reversible disk holder assembly.
Can control a variety of media including air,
gas, water, and other liquids.
Soft-seat valve plug disks
ensure tight shutoff.
Optional materials are
available for applications handling sour gases. These
constructions comply with the recommendations of
NACE International Standards MR0175 and MR0103.
The proven reliability and accurate regulation of the
1301 Series regulators (see Figure 1) make them ideal
for numerous high-pressure drop applications. They are
direct-operated, high-pressure regulators designed for
inlet pressures up to 6000 psig / 414 bar. The Type 1301F
can handle outlet pressures from 10 to 225 psig / 0.69 to
15.5 bar in three ranges and the Type 1301G can handle
outlet pressures from 200 to 500 psig / 13.8 to 34.5 bar in
These multi-purpose regulators can be used as pilot supply
or pressure-loaded regulators where high-pressure operating
medium must be reduced for use by gas regulator pilots
or pressure-loaded regulators. Their rugged design offers
versatility for a wide variety of applications including air,
gas, water, and other liquids. An optional spring case with
a tapped vent and adjusting screw closing cap is available
that enables the Type 1301F to be used as a pressure-
Figure 1. Type 1301F Regulator