Emerson 3- and 6- Pair Terminal Blocks User Manual

(0 Votes) | (0)
Page / 2
Outside Plant for
Business-Critical Continuity
1
Description
The 3 and 6-pair terminal blocks provide drop wire terminal points in ready-access and
pedestal closures. They are available with or without leads for tying into the cable. These
blocks are also available with discharge washer overvoltage protection. The stainless steel
washers provide protection in a range of 5000 volts DC and approximately 10KV or less on
a surge front of 5KV/msec.
The blocks are made of a solid injection-molded Red plastic material that has a low mois-
ture absorption rate. The terminal posts are brass and are raised to provide high surface
insulation.
On those terminals provided with double leads, the wires are 24-gauge color-coded PVC,
30-in. (762.7mm) long. Single-lead blocks have 20-1/2-in. (520mm) leads.
Terminal blocks without leads are available with a variety of binding post configurations.
Application
The Emerson Network Power 3 and 6-pair terminal blocks provide protected or unpro-
tected drop-wire terminal points in ready-access and pedestal closures.
145 145P
1645 16645P
3 and 6-Pair
Terminal Blocks
Key Features
Variety of binding post
configurations provide flexibility to
meet most termination
requirements
Solid injection-molded plastic
material provides a low moisture
absorption rate
Discharge washer overvoltage
protection is available for
protection on a range of 5000
volts DC and approximately 10KV
or less on a surge front of 5KV/
µsec
Raised terminal posts offer high
surface insulation
OSPDS-061900 / 1109