Emerson Fisher Baumann 24000S Handbook

(0 Votes) | (0)
Page / 20
www.Fisher.com
Baumann™ 24000S Stainless Steel Control Valve
Contents
Introduction 1...................................
Scope of Manual 1.............................
Safety Precautions 2...........................
Maintenance 3.................................
Installation 3...................................
Air Piping 4...................................
Disassembly 4................................
Lapping the Metal Seat 5.......................
Replacing Packing 6...........................
Actuator and Valve Body Reassembly 6............
Parts Ordering 7................................
Dimensions and Weights 17......................
Figure 1. Baumann 24000S NPT Control Valve
W9759
Introduction
The Baumann 24000S line of stainless steel pneumatic control valves (figure 1) may be used for the control of
pressure, temperature, level and flow. NPS 1/2 through 2 valves are available with NPT end connections. NPS 3 is
available as wafer style only. The 316 stainless steel valve body will withstand mildly corrosive fluids, yet is economical
enough to use in applications where carbon steel is normally specified.
Scope of Manual
This instruction manual includes installation, maintenance, and parts information for the Baumann 24000S stainless
steel control valve.
Do not install, operate, or maintain Baumann 24000S control valves without being fully trained and qualified in valve,
actuator, and accessory installation, operation, and maintenance. To avoid personal injury or property damage, it is
important to carefully read, understand, and follow all the contents of this manual, including all safety cautions and
warnings. If you have any questions about these instructions, contact your Emerson Process Management sales office
before proceeding.
Instruction Manual
D103359X012
24000S Valve
May 2011