Emerson LK150 User Manual

(0 Votes) | (0)
Page / 4
Ceiling Fan
Light Fixture
Owner’s Manual
Net Weight: 2.6 Lbs.
Includes: Three 60-Watt
Candelabra Bulbs and Fitter
Model Numbers:
Safety Instructions
WARNING: To avoid fire, shock, and serious personal injury, follow all instructions carefully.
1.Read your Owner's Manual carefully before installing the light fixture. Retain Owner's Manual for
future reference.
2.Be careful of the fan and blades when cleaning, painting, or working near the fan. Before installing
or servicing the light fixture or ceiling fan, switch power off at service panel and lock service panel
disconnecting means to prevent power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the
service panel.
3.Do not exceed the wattage indicated on fixture.
1.To avoid possible electrical shock be sure electricity is turned off at the main fuse or circuit breaker
box before wiring.
2.Make certain no bare wires are exposed outside the wire connectors.
3.All wiring must conform to national and local electrical codes.
4.Follow the recommended instructions for the proper method of wiring your new light fixture. If you
feel you do not have enough electrical wiring knowledge or experience, have your light fixture
installed by a licensed electrician. Any electrical work not described in this manual should be
performed by a licensed electrician.
WARNING: To reduce the risk of possible fire and electrical shock, install only on Emerson CF772
Series Ceiling Fans in indoor locations.
Part No. F40BP74420001 Form No. BP7442-1
Revision: 130402 ETL Model Nos.: LK150 and LK151