Emerson LMS 1000 User Manual

(1 Votes) | (1.0)
Page / 2
1007DRA-LMS1000 / 0114
Monitoring System
Emerson Network Power’s LMS1000 is the field-
proven industry standard, offering a complete remote
monitoring solution with input/output (I/O) networking
capability and a fully integrated Ethernet port.
Its low profile, extended temperature range and plug-in I/O cards make the LMS1000 well
suited for smaller, outdoor applications. However the free-topology I/O networking capa-
bility allows the unit to monitor over 1,600 I/O points, making it ideal for larger sites.
Alarm Mediation
Built-in logic and timers allow
you to use the LMS1000 as an
alarm concentrator to filter out unwanted or nuisance alarms. You can also convert conven-
tional relay alarms to SNMP traps, e-mail or TL1 autonomous messages.
Battery Management
Use digital temp sensors to detect battery thermal runaway, or use the high precision bipo-
lar analog cards to detect high battery float current and/or voltage imbalance conditions.
Capacity Management
Set threshold alarms on plant capacity and critical branch distributions to prevent equip-
ment outages as a result of poorly charged batteries or blown fuses. Notify by relay closure,
modem report, pager, SNMP trap or TL1 autonomous message — all from the same device!
Use alarm history data, event data, and channel statistics
to reconstruct events leading up to outages.
Energy Management
Control rectifiers to match the on-line
capacity to the actual load.
Routine Engine Cycling
Automatically routine engines
on specific days and times.
Power Metering
Compute and store power consumption (kWh)
data for branch distributions and commercial AC.
Rectifier Sequencing
Limit and/or delay rectifier turn-on for applica-
tions with limited standby engine capacity.
Key Features
n Front access cabinets —
provide easy access for future
growth and service
n Modular design — allows for
system expansion with the
addition of expansion cabinets
and expansion assemblies
n Flexible — environmentally
hardened for use in
uncontrolled and extended
temperature environments;
wide DC input range (20-60
VDC); 19-in. rack mounting
n Remote access — enables
monitoring from central
location via dial-up, Ethernet
or RS232
n Alarm reporting — configurable
to report to users via pagers,
SNMP, TCP/IP, TL1/x.25, TL1/IP
and e-mail
n Web pages — system can host
its own user-configurable web
page for all system information
n Open architecture — simple
command line interface for
integration into large scale
NMS software
n Complies with industry
standards — NEBS level 3
certified and UL Listed
I/O Card Cage (10 Slots)
Plug-in Motherboard