Emerson Lorain BD 2000 User Manual

(0 Votes) | (0)
Page / 2
1005D-LBD2000 /1206
Feature-rich design provides monitoring and control.
The Lorain
BD 2000 is a modular DC to DC Battery Disconnect providing disconnection
and overcurrent protection for +24VDC or -48VDC battery strings. Over-current protection
is provided by a user-specified fuse rated from 1000 to 2000 amps. A shunt, included with
the over-current protection device, measures charge and discharge current and can be
monitored by a Lorain
VPS or LVS MCA, Emerson monitoring equipment, or any monitor-
ing system using a 25mV shunt input. The disconnect can be wall mounted or 23-in. rack
mounted as required. Separate remote and EPO inputs are standard features that allow for
operation of the disconnect remotely for use in EPO or low-voltage disconnect applications.
The built-in shunt measures charge and discharge current for the batteries. Battery damage
is prevented and battery life is increased with the use of a built-in Vortex
shunt card and a
VPS or LVS with the MCA set up to limit battery recharge current. An EPO switch can
be connected to this disconnect to comply with local and national fire codes (NEC). Low-
voltage controllers can be interfaced directly to this disconnect to provide protection of the
batteries during discharge.
Safety and security features include a cover that can be locked in place during maintenance
operations to prevent access to the battery fuses. A door alarm switch provides a set of
contacts that will change state whenever the door is opened. Any access or operation of
the door can be monitored using this feature. The door latch can also be tool-secured for
restricted access.
BD 2000
2000 Amp Battery Disconnect
Key Features
nLocal and remote operation of
nSmall footprint and multiple wiring
attachment points allow for ease of
nCurrent monitoring is provided by
a 25mV shunt included with each
nBattery recharge current limiting
ability can increase battery life
nSafety features include a Lock
Out-Tag Out (LO/TO) attachment
point and a door latch that is tool-
secured for restricted access
nAlarm options include a Form C, FA
alarm, contactor status alarm and a
door open alarm
nTwo LED indicators provide a visual
display of the status of the fuse and
nA removable door permits easy
wiring access during installation
and maintenance
nDisconnect assists in compliance
with local codes
BD 2000 (Open)