Emerson OMNI 2000 - Models 1620 and 1620RI User Manual

(0 Votes) | (0)
Page / 2
The OMNI 2000 cleaning system by
Branson is a fully-configured ultrasonic
cleaning and rinsing system with a
built-in dryer. Also available, as an
option, is a rust inhibitor station in the
second rinse tank. The equipment
incorporates quality workmanship and
materials without including unneces-
sary extras.
The OMNI 2000 offers a full range of
hard-working features, while occupying
only a fraction of the floor space of
comparable systems. All controls are
mounted in a convenient control box
and operate at 24 volts for safety.
CLEANING
Precision cleaning is accomplished
in the first chamber. This chamber
is equipped with Branson Series 7000
industrial 40 kHz ultrasonic compo-
nents and thermostatically-controlled
heat. A recirculating pump and filter
system to continuously remove
particulate material is standard.
OMNI 2000 Cleaning
Systems – Models 1620
and 1620 RI
Ultrasonic Cleaning
Omni Series
RINSING
Precision cleaning is accomplished in
the first process tank. This tank is
equipped with Branson industrial 40
or 25 kHz ultrasonic components and
thermostatically-controlled heat. A
recirculating pump and filter system
to continuously remove particulate
material is standard.
RUST INHIBITING OPTION
As an option, the user may choose to
use the second rinse tank as a rust
inhibitor dip prior to drying. This model,
1620-RI, is useful when cleaning steel
components. The valving associated
with this system allows easy conversion
from a single overflow rinse back to
a dual tank cascade rinse in seconds if
your process changes.
DRYING
The drying station utilizes both
elevated temperature and rapid air
movement to produce dry parts. The
chamber is furnished with a 3" vent
duct to facilitate moist air removal.