Cobra Front Disk Brake Conversion Kit
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD RACING PERFORMANCE PARTS
Please contact the Tech “Hot Line” for the most current instruction informa tion (586) 468-1356
! ! ! PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION ! ! !
The components in this kit will improve the brakin g performance of your 1996-04 Mustang GT. This kit requires
the use of 17" wheels such as those used on the 1994-04 Mustang Cobra. Other wheels that will clear the
calipers in this kit are Ford Racing part numbers M-1007-R58/C58/C178/D178. A 1994-04 17" x 4" mini-spare
wheel is available from Ford/Lincoln/Mercury dealers under part number F 4ZZ-1K007-C or Ford Racing part
The installation of this kit can be done by someone with an average amount of experience, but it is very important to
follow the instructions in the Brake Section of the 199 6-04 Mustang Shop Manual or equivalent. If you do not feel
comfortable with this, have the installati on performed by an experienced mecha nic.
STEP 1: Raise vehicle off ground and support with jack stand s.
STEP 2: Bench bleed calipers befo r e installation to make vehicle bleeding easier.
STEP 3: Remove and replace existing front rotors, calipers, caliper bolts and hoses with components in kit.
STEP 4: Bleed vehicle brake system (with power brake bl eeder if available).
STEP 5: Remove jack stands and lower vehicle to ground.
STEP 6: Test brake system in safe place.
Tech “Hot Line” (586) 468-1356
Factory Ford shop manuals are available fr om Helm Publications, 1-800-782-4356
Page 1 of 2
! ! ! CAUTION: IMPROPER INSTALLATION OF THIS KIT COULD ADVERSELY EFFECT THE SAFETY OF
YOUR VEHICLE ! ! !
! ! ! CAUTION: BE SURE TO SUPPOR T VEHICLE PROPERLY TO AVOID PERSONAL H AZA RD ! ! !