Netgear A6200 Buyer's Guide

(0 Votes) | (0)
Page / 2
Installation
WiFi USB Adapter
Model A6200
Package Contents
2. Click the Setup button.
The Soware Update Check screen displays.
3. Install the setup soware.
You have two options:
• Connected to the Internet. If you are connected to the Internet,
click the Check for Updates button. Aer the soware checks for
updates, the Update Check Complete screen displays. Click the
Continue button. The Welcome screen displays.
• Not connected to the Internet. If you are not connected to the
Internet, click the Install from CD button. The Welcome screen
displays.
4. To accept the license agreement, click the I agree radio button and
then click the Next button.
A message displays asking you to wait while soware is installed. Aer a
few minutes, NETGEAR genie prompts you to insert your adapter.
5. You can use the adapter with or without the desktop dock:
• To use the adapter with the desktop dock, place the adapter into
the dock and connect the USB cable to the USB port on your
computer.
• To use the adapter without the desktop dock, insert the adapter
into a USB port on your computer.
Note: For added range and performance, see the other side of this
installation guide.
A6200
WiFi Adapter
and Desktop Dock
6. Return to the Netgear genie screen and click the Next button.
NETGEAR genie displays a list of wireless networks in your area.
Standalone Driver Installation
1. Insert the resource CD in your computer CD drive.
Note: If your computer does not have a CD drive, download the A6200
resource CD driver by visiting http://support.netgear.com. Click the
Support For Home button and enter A6200 in the search field.
If the Resource CD screen does not display, browse the files on the CD and
double-click Autorun.exe.
The NETGEAR Resource CD screen displays.
2. Click the Install Windows Standalone Driver button.
The driver installs on your computer.
3. When prompted, either place the adapter into the desktop dock and
connect the USB cable to a USB port on your computer, or use the adapter
without the desktop dock and insert the adapter into a USB port on your
computer.
Resource CD
Installation
1. Insert the resource CD in your computer CD drive.
Note: If your computer does not have a CD drive, download the A6200
resource CD driver by visiting http://support.netgear.com. Click the
Support For Home button and enter A6200 in the search field.
If the Resource CD screen does not display, browse the files on the CD
and double-click Autorun.exe.
The NETGEAR Resource CD screen displays.